-
Contact Box for KYN28-12
1. Rated Voltage: 12kV. 2. Installation Method: Vertically installed at the rear of the cabinet, connected and assembled with the primary busbar.. 3. Compatible Cabinets: Suitable for KYN28A-12 typeAdd to Inquiry -
KYN28-12 Indoor Armored Metal-Enclosed Switch Equipment
Production Description KYN28-12 indoor armored metal-enclosed switch equipment (hereinafter referred to as KYN28-12 switchgear) is suitable for three-phase AC 50HZ, 7.2~17.5kV single busbar andAdd to Inquiry -
40.5kV Post Insulator
1.Rated voltage:40.5kV. 2.Creep distance:≥1256mm. 3.Bending failure load:6kN. 4.Power frequency withstand voltage:95kV/min . 5.Lightning impulse withstand voltage:185kV. 6.Installation method:Add to Inquiry -
JN15-12DD-150mm Indoor Electric Earthing Switch
1.Rated Voltage: 12kV. 2.Rated Frequency: 50/60Hz . 3.Rated short time withstand current 31.5kA. 4.Rated withstand current (peak):80 kA . 5.Installation method: Center-mounted hardcart or fixedAdd to Inquiry -
12kV Outdoor Bushing Insulator
1. Rated Voltage: 12kV.. 2. This product is an insulating component used in 12kV and below medium-voltage electrical systems.. 3. This model features an aluminum conductor bushing insulator.. 4. ItAdd to Inquiry -
RN8 Gas Insulation Ring-Network Switchgear Cabinet
1.Rated current:12KV and 24KV . 2.Rated frequency: 50Hz. 3.Main busbar rated current:630A. 4.Insulation and arc extinguishing medium:SF6 . 5.The operating mechanism:Sring type 6.Scope ofAdd to Inquiry -
KYN61-40.5 Indoor Armored Metal-Enclosed Switch Equipment
1.Rated Voltage:40.5kV. 2.Rated current:630/1250/1600/2000/2500/3150/4000A. 3.Installation method:Floor-mounted or in a prefabricated outdoor box. 4.Applicable environment:Indoor application.Add to Inquiry -
12kV Phase Column Component
1.12kV phase column component vertically mounted on 12kV vacuum circuit breaker frame;. 2.Improvement of electrical insulation performance;. 3.Enhanced mechanical protection;. 4.Easy to install andAdd to Inquiry -
24kV Insulator
1. Rated Voltage: 24kV. 2. Installation Method: Vertically or horizontally mounted within the cabinet and between conductive components.. 3. Compatible Cabinet: Compatible with KYN28A, XGNAdd to Inquiry -
40.5kV Bushing Insulator
1. Rated Voltage: 40.5kV. 2. Installation Method: Penetrate into cabinets or between the cabinet and other grounded objects.. 3. Compatible Cabinets: Compatible with KYN61-40.5 switchgear.. 4.Add to Inquiry -
KYN28-24 Indoor Armored Metal-Enclosed Switch Equipment
1.Rated Voltage:24kV. 2.Rated Frequency:50Hz. 3.Rated current:630/1250/1600/2000/2500/3150/4000A. 4.Installation method: floor-mounted or installed in a prefabricated outdoor box. 5.ApplicableAdd to Inquiry -
JN22-40.5 Indoor Grounding Switch
1.Rated Voltage: suitable for 40.5kV and below AC power system. 2.Rated Frequency: 50Hz . 3.Rated short time withstand current 31.5kA. 4.Rated withstand current (peak):80 kA . 5.Installation method:Add to Inquiry
It has a simple and effective ‘Five Anti’ interlock to prevent misuse. The cabinet can be used with ZN63A (VS1), VD4, ZN21, 3A1-1, VB2 and VEP vacuum circuit breaker, VC7 vacuum contactor, load...
KYN28-12 Series metal-clad central-mounted type metal-enclosed switch cabinet (short for “switchgear") is a new type of product deigned on the basis of...
The document provides instructions for installation and use of the KYN28-12(Z) armored withdrawable AC metal-enclosed switch cabinet. The switch cabinet is an indoor complete power distribution unit...
KYN28-12 (GZS1) metal clad removable enclosed switchgear cabinet, suitable for 3.6-12 kV Three-Phase AC 50HZ single wire distribution system, complete set of power distribution cabinet. ... The...
The branch busbar is connected to the static contact box [6] and main busbar [4] through bolt. For special requirement, the busbar can be wrapped with heat-shrinkable bushing, link bolt insulation...
KYN28A-12 is a medium voltage removable metal-clad switchgear designed for indoor power distribution systems. It operates at a three-phase 50Hz frequency with a rated voltage of 12kV and a maximum...













