-
40.5kV Phase Column Component
1.40.5kV phase column component vertically mounted on 24kV circuit breaker frame;2.Improvement ofAdd to Inquiry -
WSK Temperature And Humidity Controller
1.Working units:two units .. 2.Control system:One-way humidity monitoring; one-way temperatureAdd to Inquiry -
40.5kV Post Insulator
1.Rated voltage:40.5kV. 2.Creep distance:≥1256mm. 3.Bending failure load:6kN. 4.Power frequencyAdd to Inquiry -
JN15-12DD-150mm Indoor Electric Earthing Switch
1.Rated Voltage: 12kV. 2.Rated Frequency: 50/60Hz . 3.Rated short time withstand current 31.5kA.Add to Inquiry -
40.5kV Shielding Bushing
1. Rated Voltage: 40.5kV. 2. Installation Method: Penetrate into cabinets or between the cabinetAdd to Inquiry -
12kV Outdoor Bushing Insulator
1. Rated Voltage: 12kV.. 2. This product is an insulating component used in 12kV and belowAdd to Inquiry -
Contact Box for KYN28-24
1. Rated Voltage: 24kV. 2. Installation Method: Vertically installed at the rear of the cabinet,Add to Inquiry -
24kV Phase Column Component
1.24kV phase column component vertically mounted on 24kV vacuum circuit breaker frame..Add to Inquiry -
12kV Phase Column Component
1.12kV phase column component vertically mounted on 12kV vacuum circuit breaker frame;.Add to Inquiry -
40.5kV Sensor
1. Rated Voltage: 40.5kV. 2. Installation Method: Vertically or horizontally mounted within theAdd to Inquiry -
24kV Sensor
1. Rated Voltage: 24kV. 2. Installation Method: Vertically or horizontally mounted within theAdd to Inquiry -
KYN28-24 Indoor Armored Metal-Enclosed Switch Equipment
1.Rated Voltage:24kV. 2.Rated Frequency:50Hz. 3.Rated current:630/1250/1600/2000/2500/3150/4000A.Add to Inquiry
ET2 is an indoor installed 40.5kV armored removable air-insulated switchgear, which is suitable for three-phase AC 50Hz single bus section system, including 630~3150A current rating....
Vd4 36kv 40.5kv Vacuum 3 Phase Circuit Breaker 2000A Power Vd4 Vcb Vacuum Circuit Breaker High Voltage Switchgear Indoor 12kv 13.8kv 24kv 35kv US$10,000.00-20,000.00 / Piece 1...
KYN61-40.5 removable AC metal-clad switchgear applies to 40.5kV, 3 phase, AC and 50/60Hz electrical power network for receiving and distributing power energy and also for control,...
LBS405 COMPONENTS Hughes LBS405 load break switch for 33/40kV has the following components: • ABB VG10 2000A/20kA 40.5kV vacuum interrupter (1); • Integrated 3x phase...
KYN61-40.5 Air insulated metal clad movable switchgear is an indoor switchgear, assembly operating under the conditions of 50/60Hz three phase and rated 40.5kV AC voltage, which is...
ET2 product is an indoor installed 40.5kV armored removable air-insulated switchgear, which is suitable for three-phase AC 50Hz single bus breaking system, including 630~3150A series...













