Products

1.Rated Voltage :12kV. 2.Rated Frequency:50/60Hz. 3. Rated breaking current:1200A. 4. Mechanical endurance :2000A. 5.Installation method: side-mounted fixed installation. 6.Applicable cabinet:

1. Rated Voltage: 12kV. 2. Installation Method: Fixed cabinet side installation.. 3. Compatible Cabinet: Compatible with HXGN-12 series ring main units.. 4. Product Compliance with Standards:

Products Description GCS low voltage withdrawable switchgear is suitable for power plants, petrochemical industry, metallurgy, textile, high-rise building power supply and other industries. It is

1.Rated Voltage:40.5kV. 2.Rated current:630/1250/1600/2000/2500/3150/4000A. 3.Installation method:Floor-mounted or in a prefabricated outdoor box. 4.Applicable environment:Indoor application.

1. Rated Voltage:72.5kV. 2. SF6 gas：good arc extinguishing performance.. 3. Standard Compliance:GB/T1984-2014. 4. Product advantages: superior breaking capability, reliable insulation, and minimal

Products Description MNS low voltage withdrawable switchgear is a kind of factory-assembled combined low-voltage switchgear (hereinafter referred to as the device) with standard mould parts, which is

1. Rated Voltage: 40.5kV. 2. Installation Method: Vertically installed at the rear of the cabinet, connected and assembled with the primary busbar.. 3. Compatible Cabinets: Suitable for KYN61-40.5

1. Rated Voltage: 24kV. 2. Installation Method: Vertically installed at the rear of the cabinet, connected and assembled with the primary busbar.. 3. Compatible Cabinet: Suitable for KYN28A-24 type

1. Rated Voltage: 12kV. 2. Installation Method: Vertically installed at the rear of the cabinet, connected and assembled with the primary busbar.. 3. Compatible Cabinets: Suitable for KYN28A-12 type

1.Rated voltage:12/24/40.5kV. 2.Harness Material:Copper. 3.Secondary power frequency withstand voltage:2kV. 4.Wire harness diameter:0.75/1/1.5/2.5mm2. 5.Installation method: assembled inside the

1. Rated Voltage: 40.5kV. 2. Installation Method: Can be mounted inside an insulated cylinder or embedded in epoxy resin.. 3. Suitable Carrier: Suitable for 35kV circuit breakers, KYN61-40.5 type

1 VTZ-24 vacuum circuit breaker performance. 2 Simple and convenient maintenance. 3 High conductivity. 4 Wide range of use. 5 Support intelligent customization