-
Contact Box for KYN61-40.5
1. Rated Voltage: 40.5kV. 2. Installation Method: Vertically installed at the rear of the cabinet,Add to Inquiry -
WSK Temperature And Humidity Controller
1.Working units:two units .. 2.Control system:One-way humidity monitoring; one-way temperatureAdd to Inquiry -
40.5kV Post Insulator
1.Rated voltage:40.5kV. 2.Creep distance:≥1256mm. 3.Bending failure load:6kN. 4.Power frequencyAdd to Inquiry -
40.5kV Shielding Bushing
1. Rated Voltage: 40.5kV. 2. Installation Method: Penetrate into cabinets or between the cabinetAdd to Inquiry -
Contact Box for KYN28-24
1. Rated Voltage: 24kV. 2. Installation Method: Vertically installed at the rear of the cabinet,Add to Inquiry -
Contact Box for KYN28-12
1. Rated Voltage: 12kV. 2. Installation Method: Vertically installed at the rear of the cabinet,Add to Inquiry -
Fixed Contact for Vacuum Circuit Breaker
1.Fixed contacts for vacuum circuit breaker. 2.Good electrical conductivity. 3.High contactAdd to Inquiry -
24kV Sensor
1. Rated Voltage: 24kV. 2. Installation Method: Vertically or horizontally mounted within theAdd to Inquiry -
12kV Sensor
1. Rated Voltage: 12kV. 2. Installation Method: Vertically or horizontally mounted within theAdd to Inquiry -
40.5kV Insulator
1. Rated Voltage: 40.5kV. 2. Installation Method: Vertically or horizontally mounted within theAdd to Inquiry -
40.5kV Bushing Insulator
1. Rated Voltage: 40.5kV. 2. Installation Method: Penetrate into cabinets or between the cabinetAdd to Inquiry -
JN15-12 Indoor Grounding Switch
1. Rated Voltage: 12kV. 2. Installation Method: Center-mounted handcart or fixed cabinet.. 3.Add to Inquiry
Switchgear according G83906 and IEC298 standards and design,And can be removed from the cabinet as a whole unit (trolley )components ....
KYN61-40.5 switchgear 47KV contact box KYN61-40.5 (Z) armored removable AC metal-enclosed switchgear is suitable for three-phase AC rated voltage 35KV, frequency 50Hz power system, used for power...
CH3-40.5kv Epoxy Resin Contact Box (KYN61-40.5 Cabinet) Product description. The contact box is formed byepoxy with APG technies,it is used for insulation isolation and connection...
35kV 40.5kV High voltage epoxy contact box with shield for KYN61 Switchgear. The contact box product uses epoxy resin material with excellent insulation performance, and is injection molded using the...
KYN61-40.5 AC withdraw out metal-clad and metal-enclosed switchgear is suitable for single-bus and the single-bus power system of three-phase AC 50HZ, 35KV. And it mainly used in the power plants,...
KYN61-40.5 High Voltage Armor Type AC Metal-Enclosed Switchgear Panel, suitable for three-phase AC 50Hz/40.5kV single-busbar segmented power system, used to receive and distribute electric energy and...













