-
24kV Insulator
1. Rated Voltage: 24kV. 2. Installation Method: Vertically or horizontally mounted within the cabinet and between conductive components.. 3. Compatible Cabinet: Compatible with KYN28A, XGNAdd to Inquiry -
KYN28-12 Indoor Armored Metal-Enclosed Switch Equipment
Production Description KYN28-12 indoor armored metal-enclosed switch equipment (hereinafter referred to as KYN28-12 switchgear) is suitable for three-phase AC 50HZ, 7.2~17.5kV single busbar andAdd to Inquiry -
40.5kV Shielding Bushing
1. Rated Voltage: 40.5kV. 2. Installation Method: Penetrate into cabinets or between the cabinet and other grounded objects.. 3. Compatible Cabinets: Compatible with KYN61-40.5 switchgear.. 4.Add to Inquiry -
12kV Outdoor Bushing Insulator
1. Rated Voltage: 12kV.. 2. This product is an insulating component used in 12kV and below medium-voltage electrical systems.. 3. This model features an aluminum conductor bushing insulator.. 4. ItAdd to Inquiry -
Contact Box for KYN28-12
1. Rated Voltage: 12kV. 2. Installation Method: Vertically installed at the rear of the cabinet, connected and assembled with the primary busbar.. 3. Compatible Cabinets: Suitable for KYN28A-12 typeAdd to Inquiry -
40.5kV Phase Column Component
1.40.5kV phase column component vertically mounted on 24kV circuit breaker frame;2.Improvement of electrical insulation performance3.Enhanced mechanical protection4.Easy to install andAdd to Inquiry -
12kV Phase Column Component
1.12kV phase column component vertically mounted on 12kV vacuum circuit breaker frame;. 2.Improvement of electrical insulation performance;. 3.Enhanced mechanical protection;. 4.Easy to install andAdd to Inquiry -
24kV Sensor
1. Rated Voltage: 24kV. 2. Installation Method: Vertically or horizontally mounted within the cabinet and between conductive components.. 3. Compatible Cabinets: Suitable for KYN28A-24 typeAdd to Inquiry -
40.5kV Insulator
1. Rated Voltage: 40.5kV. 2. Installation Method: Vertically or horizontally mounted within the cabinet and between conductive components.. 3. Compatible Cabinet: Compatible with KYN28A, XGN, JYN,Add to Inquiry -
12kV Bushing Insulator
1. Rated Voltage: 12kV. 2. Installation Method: Penetrate into cabinets or between the cabinet and other grounded objects.. 3. Compatible Cabinets: Compatible with KYN28A-12 switchgear.. 4. ProductAdd to Inquiry -
KYN28-24 Indoor Armored Metal-Enclosed Switch Equipment
1.Rated Voltage:24kV. 2.Rated Frequency:50Hz. 3.Rated current:630/1250/1600/2000/2500/3150/4000A. 4.Installation method: floor-mounted or installed in a prefabricated outdoor box. 5.ApplicableAdd to Inquiry -
JN22-40.5 Indoor Grounding Switch
1.Rated Voltage: suitable for 40.5kV and below AC power system. 2.Rated Frequency: 50Hz . 3.Rated short time withstand current 31.5kA. 4.Rated withstand current (peak):80 kA . 5.Installation method:Add to Inquiry
The compact horizontal line post insulator profile has the same shed diameter to maximize flashover performance in polluted environments over a minimum insulator length. Our Line...
The SafePlus AirPlus portfolio, covering 24kV applications, is based on AirPlus TM technology as insulation medium. ... Gas-insulated compact switchgear SafePlus AirPlus 24kV, 630A ; Key...
24kV Polymer Pin Post Insulator is applied to high voltage power line service. And have features of good hydrophobicity, anti-ageing, anti-leakage trace and electric erode proof, tensile...
Composite polymer insulator is of high strength and light weight. A synthetic insulator is 1/5 of that of porcelain insulator, but the circum-tensile strength of insulator is very high. Generally, it...
Porcelain pin insulator SDI30. SDI30 is used with bare wires or covered conductors. Suitable for installation on pin SOT24 (SFS 4385). The conductor can be tied to the top-groove or to the...
24kV pin post insulator is suitable for high-voltage line facilities. It has good hydrophobicity, aging resistance, tracking resistance and electrical corrosion resistance, high tensile and bending...













