-
24kV Vacuum Interrupter for Vacuum Circuit Breaker
1. Rated Voltage: 24kV. 2. Installation Method: Can be mounted inside an insulated cylinder or embedded epoxy resin.. 3. Suitable Carrier: Suitable for 24kV circuit breakers, KYN28A-24 type cabinets,Add to Inquiry -
VS1-YB Oil Buffer For Vacuum Circuit Breaker
1.Product name: Oil Buffer . 2.Product model:VS1-YB . 3.Product usage: for vacuum circuit breaker. 4.Product height:120mm.Add to Inquiry -
12kV Vacuum Interrupter Embedded Pole For Indoor Switchgear
1.Rated voltage :12kv . 2.Rated frequence:50/60Hz. 3.Integrated packaging design. 4.product advantages :Insulation enhancement performance and reliability,High breaking capacity,Long life and lowAdd to Inquiry -
12kV Insulation Pull Rod Assembly For 50kA Rated Breaking...
1. Rated Voltage: 12kV. 2. Rated short-circuit breaking current:50KA. 3. Rated power frequency withstand voltage :48 kV/1min. 4. Tensile strength:28kN.Add to Inquiry -
10kV Indoor High Voltage Isolation Truck
1.rated voltage: 12kV. 2.Rated current: 630A/1250A/1600A. 3.Rated short-time withstand current(4s): 20kA/25kA/31.5kA. 4.Rated peak withstand current: 50kA/63kA/80kA. 5.Mechanical life:≥3000 times.Add to Inquiry -
40.5kV High Current Embedded Poles
1.Rated frequency(fr):50/60Hz2.Rated Voltage(Ur):40.5kV3.Rated current:3150/4000A4.Rated short-circuit breaking current(Isc):31.5/40kA 5.Installation method:vertically installed on the 40.5kV circuitAdd to Inquiry -
CT-58 Aviation Connector
1.Rated voltage:12/24/40.5kV. 2.Harness Material:Copper. 3.Secondary power frequency withstand voltage:2kV. 4.Wire harness diameter:0.75/1/1.5/2.5mm2. 5.Installation method: assembled inside theAdd to Inquiry -
40.5kV Vacuum Interrupter for Vacuum Circuit Breaker
1. Rated Voltage: 40.5kV. 2. Installation Method: Can be mounted inside an insulated cylinder or embedded in epoxy resin.. 3. Suitable Carrier: Suitable for 35kV circuit breakers, KYN61-40.5 typeAdd to Inquiry -
12kV Vacuum Interrupter for Vacuum Circuit Breaker
1. Rated Voltage: 12kV. 2.Installation Method: Can be mounted inside an insulated cylinder or embedded in epoxy resin.. 3. Suitable Carrier: Suitable for 12kV circuit breakers, KYN28A-12 typeAdd to Inquiry -
CT-58 Control Cable Assembly
1.Rated voltage:12/24/40.5kV. 2.Harness Material:Copper . 3.Secondary power frequency withstand voltage:2kV. 4.Harness wire diameter:0.75/1/1.5/2.5 mm2. 5.Installation method: assembled inside theAdd to Inquiry -
12kV Insulating Pulling Pole Assembly
1.Rated Voltage: 12kV. 2. Rated short-circuit breaking current:25/31.5/40kA. 3. Rated power frequency withstand voltage :48 kV/1min. 4. Scope of use and applications: It can be installed in theAdd to Inquiry -
Closing And Opening Coil
1.withstand voltage :The insulation of the coil to the shell can withstand the power frequency voltage ≥ 2500V;2.Product advantages:High reliability,High reliability,Strong compatibility,StrongAdd to Inquiry
Batching of pre-assembled vacuum interrupters. Clean room conditions to US standard class 1000. Vacuum furnaces – evacuate and seals the vacuum interrupter in a single operation....
Eaton vacuum interrupters are used in circuit breakers in the most demanding electrical circuit protection applications to minimize damage caused by electrical overloads or short circuits....
inspection of W-VAC i IEC vacuum circuit breakers for qualified personnel. Reliable control and protection of short circuit current can be achieved through the application of W-VAC i vacuum...
Consult MITSUBISHI ELECTRIC's entire 3.6/7.2/12/24kV Vacuum Circuit Breakers Type VPR catalogue on ArchiExpo. Page: 1/23. ... IfeajMife^ • Incorporates Mitsubishi Electric vacuum...
W-VACi IEC 24 kV. Reliability, safety and performance in a compact package. The new and extensive line of W-VACi compact MV vacuum circuit breakers with IEC ratings of 24 kV are...
short-circuit breaking operations have to be reckoned with. Vacuum circuit breakers of type VM1 are prepared . for auto-reclosing operations and are notable for their especially high...













