Blog

Home/Blog/Details

What are the types of current transformers?

What are the types of current transformers?

1. Classification by structure

(1) Electromagnetic current transformer (traditional type)

Principle: Based on electromagnetic induction, the primary and secondary sides are coupled through an iron core.

Subtypes:

Through-type (busbar type): directly sleeved on the conductor, used for low voltage or medium voltage.

Bushing type: installed in the circuit breaker bushing, commonly used in high-voltage GIS.

Wound type: The primary side is a multi-turn coil, with high accuracy but large size.

(2) Electronic current transformer (new type)

Principle: Uses Rogowski coil, Hall effect or fiber optic sensing technology.

Features:

No magnetic saturation: suitable for high-frequency transient current measurement (such as power electronic equipment).

Wide dynamic range: can be used for measurement and protection at the same time.

2. Classification by insulation medium

Dry-type current transformer

1) Uses ordinary insulating materials (such as epoxy resin) or varnish treatment, suitable for low voltage environment2.

2) Oil-immersed current transformer

Insulating oil and insulating paper are used as insulating media, commonly found in outdoor high-voltage equipment.

3) Gas-insulated current transformer

The main insulation uses gas (such as SF6), which is suitable for special hazardous environments.

3. Classification by purpose

1) Measuring current transformer

Within the normal working current range, it provides current signals for measuring instruments and metering devices, and the secondary side is approximately short-circuited.

2) Protective current transformer

Provides large current signals when the power grid fails, and is used for relay protection devices2.

4. Other classification methods

1) Structural form: winding type, ring type, strip type, etc. (such as busbar type, pillar type).

2) Installation method: through-type, bushing type, split type (easy to maintain).

5. Special type

Zero-sequence current transformer:

Detect three-phase unbalanced or ground fault current (such as residual current protection).

Usually sheathed outside the three-phase cable, only responding to the zero-sequence component.

DC current transformer:

Used in HVDC and new energy fields, using Hall sensors or magnetic modulation technology.

Key selection parameters

Rated current ratio (such as 1000A/5A).

Accuracy level (0.5 for measurement, 5P10 for protection).

Rated short-time thermal current (Ith): short-circuit tolerance.

Insulation level (such as 10kV, 35kV).

lzzbj4-35-current-transformer supplier

LZZBJ4-35 current transformer by Shaanxi West Power Tongzhong Electrical Co., Ltd. is a kind of sensor used to measure large current, mainly used in substations, power systems and electrical equipment, etc. The transformer adopts magnetic core type DC current transformer, which is characterized by high linearity, strong anti-interference ability, small volume, simple structure, etc., and it is a kind of very high cost-effective current transformer.

LZZBJ4-35 current transformer offers numerous advantages:

1.Safe and reliable

Electrical isolation: The current transformer can effectively isolate the primary circuit of high voltage and high current from the secondary measurement and protection circuit of low voltage and low current, avoiding direct contact of operators with high voltage current, greatly reducing the risk of electric shock, and ensuring the safety of personnel.

Strong anti-interference: Its working principle is based on electromagnetic induction, which will not affect and interfere with the measured circuit, ensuring the accuracy and reliability of the measurement results, and can work stably in a complex electrical environment, providing a strong guarantee for the safe operation of the power system.

2.High measurement accuracy

The output signal accuracy can reach 0.5, 0.2 or even higher, which can meet the application occasions with high requirements for current signal accuracy. Whether in the normal operation state of the power system or in the transient process when a fault occurs, the current can be accurately measured to provide accurate data support for relay protection, metering, monitoring, etc.

3.Wide measurement range

It can be applied to different voltage and current levels, and can meet the needs of various power systems and industrial application scenarios. Modern current transformers usually have a multi-speed adjustable measurement range. By adjusting the transformer ratio, it can adapt to current measurements of different sizes, and has strong versatility and flexibility.

For more information , please feel free to contact us as per following information:

Email: xdtz04@westpowerelectric.com

Website: https://www.xdtzelectrical.com/

Tel:+86 917 3661109

Mobilephone(whatsapp ): +86 18091765882